Material

Q235 low-carbon steel (common), stainless steel wire

Wire diameter

4.0 mm–6.0 mm

Mesh size

Typical specifications: 75×150 mm, 50×100 mm, 60×120 mm (can be customized to meet your requirements)

Panel/grid size

Height: 1.0 m, 1.2 m, 1.5 m, 1.8 m, 2.0 m, 2.4 m (customizable)
Length: 2.0 m, 3.0 m

Column specifications

Round tube Φ48–75 mm, square tube 50×50 mm / 60×60 mm, embedded depth ≥30 cm, spacing 2.0–3.0 m

Surface treatment

Hot-dip galvanizing:

- Zinc layer thickness: ≥60 μm (normal environments), ≥85 μm (highly corrosive environments).

- Plastic spraying (PVC/PE coating):

- Coating thickness: 0.2–0.5 mm.

- Plastic dipping: suitable for high corrosion protection requirements, thickness 0.8–1.2 mm

Color

Grass green, dark green, white, yellow, black, blue, etc. (plastic dipping/spraying available as an option)

Frame specifications

Square tube 20×30 mm / 30×40 mm, round tube Φ40–48 mm, wall thickness 1.5–3 mm, welded reinforcement

Anti-corrosion level

Hot-dip galvanizing + plastic dipping can achieve an expected service life of 8–15 years

Impact resistance

Suitable for general external impact (e.g., collisions with pedestrians and small vehicles). The specific load-bearing performance depends on the wire diameter and the column configuration.

Whether to support customization

Yes

Connection method

Snap-on connection (quick installation) or anti-theft bolt fixing

Column spacing

Standard spacing: 2.5 m–3.0 m (adjusted according to mesh panel length)

Rain cap

Galvanized/plastic-coated steel caps to prevent water accumulation in the columns

Flange

For installation on bridges and concrete floors; thickness ≥4 mm (for the bottom of the fixed column)

Road/rail

Height 1.8 m, mesh size 75×150 mm, wire diameter 5.0 mm, galvanized + plastic sprayed

Industrial fencing

Height 2.4 m, mesh size 60×120 mm, wire diameter 5.5 mm, flange fixed

Urban landscaping

Height 1.2 m, mesh size 50×50 mm, wire diameter 4.0 mm, plastic dip treatment